The Marsant’s X P6 Electric Bike combines a distinctive moped-inspired design with strong electric performance, long-range battery capacity, torque-sensing pedal assist, full suspension, and hydraulic disc brakes. Its HENTACH motor delivers 750W rated power, up to 1,000W peak output, and 85 Nm of torque, paired with a 48V 20.4Ah Samsung battery. With a top speed of up to 28 mph, an 80+ mile range under suitable riding conditions, and a 330 lb maximum payload, the P6 is built for daily transportation, longer recreational rides, hills, and appropriate mixed-surface routes.
Speed, range, climbing ability, and overall performance can vary with rider and cargo weight, assistance level, speed, hills, terrain, temperature, tire pressure, battery condition, and riding style.
A top speed of up to 28 mph may be subject to state and local e-bike regulations. Check the rules that apply to your riding area, including requirements for public roads, bike lanes, parks, and trails.
Key Specifications
| Feature | Specification |
|---|---|
| Brand | Marsant’s X |
| Model | P6 |
| Motor | HENTACH |
| Rated Motor Output | 750W |
| Peak Motor Output | Up to 1,000W |
| Torque | 85 Nm |
| Top Speed | Up to 28 mph |
| Battery | 48V 20.4Ah Samsung |
| Range | 80+ miles |
| Pedal Sensor | DMHC Torque Sensor |
| Front Suspension | Inverted Coil Fork with Lockout |
| Rear Suspension | 30 mm Travel with Adjustable Damping |
| Brakes | TEKTRO HD-E3520 Front and Rear Hydraulic Disc Brakes |
| Brake Rotors | 180 mm |
| Display | HUIYE LCD with CAN Protocol |
| Maximum Payload | 330 lb |
| Net Weight | 88.2 lb |
| Total Length | Approx. 68.9 inches |
| Handlebar Height | Approx. 42.1 inches |
| Handlebar Width | Approx. 28.3 inches |
| Wheelbase | Approx. 46.1 inches |
| Seat Height | Approx. 32.3 inches |
| Wheel Diameter | Approx. 22.8 inches |
| Saddle Size | Approx. 19.1 × 6.1 × 4.1 inches |
750W Motor with 1,000W Peak Power
The Marsant’s X P6 uses a HENTACH motor rated at 750W with up to 1,000W peak output and 85 Nm of torque. The high-torque motor provides strong electric assistance for acceleration, hills, daily travel, and routes where additional motor support is useful.
The P6 reaches speeds of up to 28 mph under suitable riding conditions. Actual speed can vary with battery charge, rider and cargo weight, terrain, gradient, tire pressure, weather, and other riding conditions.
Combined with torque-sensing pedal assist, the motor provides a responsive connection between rider effort and electric assistance.
48V 20.4Ah Samsung Battery
The Marsant’s X P6 is powered by a 48V 20.4Ah Samsung battery, providing substantial battery capacity for longer rides.
The P6 offers an 80+ mile range under suitable riding conditions. Actual distance varies with assistance level, rider and cargo weight, speed, hills, terrain, temperature, tire pressure, battery condition, and riding style.
Higher speeds, repeated acceleration, steep climbs, heavier loads, and demanding surfaces generally increase battery consumption.
Removable Battery Design
The P6 uses a removable battery design, allowing the battery to be taken out of the bike when needed.
This can make battery handling more convenient when storing the bike or when access to a charging location near the complete bike is limited.
Torque-Sensing Pedal Assist
The Marsant’s X P6 uses a DMHC torque sensor for responsive pedal assistance.
A torque sensor measures the force applied through the pedals, allowing motor assistance to respond as rider effort changes. Applying more force during acceleration or climbing can produce a stronger response, while lighter pedaling allows assistance to respond more moderately.
This gives the P6 a more natural connection between pedaling effort and electric motor support.
Full-Suspension Design
The Marsant’s X P6 features front and rear suspension to help manage bumps, vibration, and uneven riding surfaces.
At the front, the P6 uses an inverted coil suspension fork with lockout. The lockout function provides additional control over front suspension movement when riding conditions change.
At the rear, the P6 uses a 200 mm shock rated at 1,200 lb with 30 mm of travel and adjustable damping.
The combination of front and rear suspension provides additional comfort and control when riding across uneven pavement and appropriate mixed surfaces.
Fat Tires and Moped-Inspired Frame
The Marsant’s X P6 has a distinctive moped-inspired frame paired with a long saddle and substantial fat-tire setup.
The wheel diameter is approximately 22.8 inches, giving the P6 a compact, substantial stance. The wide tire profile provides a broad contact area and additional tire volume for varied riding surfaces.
At 88.2 lb, the P6 has different handling characteristics from a lightweight conventional bicycle. Riders should become comfortable with low-speed balance, turning, acceleration, pedal assistance, and braking before riding at higher speeds.
Long Bench-Style Saddle
One of the P6’s most recognizable features is its long bench-style saddle.
The saddle measures approximately 19.1 inches long, 6.1 inches wide, and 4.1 inches thick, while the seat height is approximately 32.3 inches.
The long saddle contributes to the P6’s moped-inspired appearance and provides a different seating position from a conventional bicycle saddle.
TEKTRO Hydraulic Disc Brakes
The Marsant’s X P6 uses TEKTRO HD-E3520 front and rear hydraulic disc brakes with 180 mm rotors.
Hydraulic operation provides controlled braking input with relatively low lever effort, which is particularly useful on a substantial electric bike capable of higher speeds.
Brake pads, rotors, lever feel, and hydraulic system performance should be inspected regularly as part of normal e-bike maintenance.
LCD Display
The Marsant’s X P6 includes a HUIYE LCD display with CAN protocol.
The handlebar-mounted display keeps ride information within easy view while riding.
Become familiar with the display, bike controls, pedal-assist response, braking behavior, and handling characteristics before riding in busy environments or at higher speeds.
Size and Rider Fit
The Marsant’s X P6 measures approximately 68.9 inches in total length with a 46.1-inch wheelbase.
Handlebar height is approximately 42.1 inches, while the handlebar measures approximately 28.3 inches wide. Seat height is approximately 32.3 inches.
The P6’s long bench-style saddle and moped-inspired geometry create a different riding position from a conventional step-over bicycle.
Rider comfort should be checked using seat position, reach to the handlebar, leg position, and overall riding posture.
88.2 lb Bike Weight and 330 lb Payload
The Marsant’s X P6 has a net weight of 88.2 lb and supports a maximum payload of 330 lb.
The maximum payload includes the rider and anything carried on the bike.
The bike’s weight should be considered before purchase if you need to carry it upstairs, lift it into a vehicle, move it frequently without riding, or transport it using a bicycle rack.
Any transportation or rack system used with the P6 should support the bike’s actual weight and dimensions.
Recommended Use
The Marsant’s X P6 may suit:
- Adult riders looking for strong electric assistance
- Riders who prefer a moped-inspired e-bike design
- Daily transportation and local trips
- Longer recreational rides
- Riders who prefer torque-sensing pedal assist
- Routes with hills
- Paved roads and appropriate mixed surfaces
- Riders who prefer front and rear suspension
- Buyers looking for hydraulic disc brakes
- Riders who prefer a long bench-style saddle
- Riders comfortable handling an 88.2 lb electric bike
The P6 may be less suitable for riders who frequently need to carry their bike upstairs, use lightweight bicycle racks, or prefer the portability of a lightweight conventional bicycle.
Before You Order
Check rider fit, storage space, transportation requirements, and your intended riding area before ordering the Marsant’s X P6.
The bike measures approximately 68.9 inches long, weighs 88.2 lb, has an approximately 32.3-inch seat height, and supports a maximum payload of 330 lb.
The P6 can reach speeds of up to 28 mph. E-bike classifications, motor limits, assisted-speed limits, rider requirements, and permitted riding areas can vary by location. Check the rules that apply where you plan to ride.
Frequently Asked Questions
How powerful is the Marsant’s X P6 Electric Bike?
The Marsant’s X P6 uses a HENTACH motor rated at 750W with up to 1,000W peak output and 85 Nm of torque. This setup provides strong electric assistance for acceleration, hills, and everyday riding.
What is the top speed of the Marsant’s X P6?
The P6 reaches speeds of up to 28 mph under suitable riding conditions. Actual speed varies with rider and cargo weight, battery charge, terrain, hills, tire pressure, weather, and riding conditions.
How far can the Marsant’s X P6 travel?
The Marsant’s X P6 offers an 80+ mile range under suitable riding conditions.
Actual range depends on assistance level, rider and cargo weight, speed, hills, terrain, temperature, tire pressure, battery condition, and riding style.
What battery does the Marsant’s X P6 use?
The P6 uses a 48V 20.4Ah Samsung battery, providing substantial battery capacity for longer rides.
Is the Marsant’s X P6 battery removable?
Yes. The P6 has a removable battery design, allowing the battery to be taken out of the bike when needed.
Does the Marsant’s X P6 have a torque sensor?
Yes. The P6 uses a DMHC torque sensor that responds to rider pedaling force and adjusts electric assistance according to rider input.
Does the Marsant’s X P6 have full suspension?
Yes. The P6 has an inverted coil suspension fork with lockout at the front and an adjustable rear shock with 30 mm of travel.
What brakes does the Marsant’s X P6 use?
The P6 uses TEKTRO HD-E3520 front and rear hydraulic disc brakes with 180 mm rotors.
How much does the Marsant’s X P6 weigh?
The Marsant’s X P6 has a net weight of 88.2 lb.
Its weight should be considered when planning storage, stair access, vehicle transportation, or bicycle rack use.
What is the maximum payload of the Marsant’s X P6?
The Marsant’s X P6 supports a maximum payload of 330 lb. The total payload includes the rider and anything carried on the bike.
What is the seat height of the Marsant’s X P6?
The P6 has an approximately 32.3-inch seat height.
What are the dimensions of the Marsant’s X P6?
The P6 measures approximately 68.9 inches long with a 46.1-inch wheelbase. Handlebar height is approximately 42.1 inches, and handlebar width is approximately 28.3 inches.
Can the Marsant’s X P6 be ridden at 28 mph on public roads?
That depends on the bike’s configuration and the rules where you ride. E-bike classification, motor output, assisted speed, rider requirements, and permitted riding locations can vary by state and local jurisdiction.
Check the rules that apply to roads, bike lanes, parks, and trails in your area.
Reviews
There are no reviews yet.